Calendar
Explore This Section
NYSERDA, New York State utilities, the Clean Heat Connect network, and our trusted partners are committed to supporting heat pump installers with educational opportunities and networking events.
The below calendar shows our current schedule of heat pump installation and service trainings, sizing and design trainings, sales and business practice trainings, and other events to help you grow your business.
Using the Calendar:
- Use the filters below to find events by key word or phrase, start or end date, filter by specific topic(s) or by event type(s).
- Once you select the filters, click the “Filter Events” button to populate your results.
- To clear all filters, click the “Clear Search” button.
Please direct any questions to TRC Companies, our technical partner, by emailing them at CleanHeatConnect@TRCcompanies.com.
April 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
TC-5i VRV Commissioning
Sponsored by Daikin
Tuesday, April 23, 2024 8:30AM – 4:30PM ET
- Topic: Installation & Service Trainings
- Type: Live In-Person
- Location: 817 Sunrise Hwy, Lynbrook, NY 111563
TRV-6 Amana S-Series Installation and Start Up
Sponsored by Daikin
Tuesday, April 23, 2024 8:30AM – 4:30PM ET
- Topic: Installation & Service Trainings
- Type: Live In-Person
- Location: 95 Halstead, Rochester, NY 14610
TD-7 Daikin Ductless Install & Start-up (Includes R-32)
Sponsored by Daikin
Monday, April 29, 2024 8:30AM – 4:30PM ET
- Topic: Installation & Service Trainings
- Type: Live In-Person
- Location: 817 Sunrise Hwy, Lynbrook, NY 11563, USA
ITEC Heat Pump Installation Course
Sponsored by NYSERDA
Monday, April 29, 2024 9:30AM – 2:00PM ET
ITEC'S 30-hour Heat Pump Installation course is tailored specifically for installation technicians to provide deeper understanding of the application, design, and installation best practices for both new installations and retrofit application
Graduates of this course will satisfy the training requirements for contractors to apply for participation in an approved Air Source Heat Pump Installer and will receive the certificates below allowing them to have their customers apply for utility rebates.
ASHP Manufacturer-Sponsored Installation Training Certificate
ASHP Manufacturer-Sponsored Cold Climate ASHP Sizing/Design Training Certificate
- Topic: Sizing & Design Trainings
- Type: Live In-Person
- Location: 105 Mclaughlin Rd, Rochester, NY 14615
Electrification Spotlight: Heat Pump Water Heaters
Sponsored by NEEP
Tuesday, April 30, 2024 1:00PM – 2:30PM ET
This session provides key information on electrifying water heating systems with heat pump water heaters. Resources include sizing recommendations and a building code permitting and inspection checklist.
Audience: HVAC Contractors, Plumbers, Code Officials, Building Inspectors
- Topic: Other
- Type: Live Webinar
- Location: Online
- Trainer: Northeast Energy Efficiency Partner
May 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
TRV-3 Fit Install and Commissioning 01-22
Sponsored by Daikin
Wednesday, May 01, 2024 8:30AM – 4:30PM ET
- Topic: Installation & Service Trainings
- Type: Live In-Person
- Location: 817 Sunrise Hwy, Lynbrook, NY 11563
June 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
ITEC Heat Pump Installation Course
Sponsored by NYSERDA
Monday, June 03, 2024 9:30AM – 2:00PM ET
ITEC'S 30-hour Heat Pump Installation course is tailored specifically for installation technicians to provide deeper understanding of the application, design, and installation best practices for both new installations and retrofit application
Graduates of this course will satisfy the training requirements for contractors to apply for participation in an approved Air Source Heat Pump Installer and will receive the certificates below allowing them to have their customers apply for utility rebates.
ASHP Manufacturer-Sponsored Installation Training Certificate
ASHP Manufacturer-Sponsored Cold Climate ASHP Sizing/Design Training Certificate
- Topic: Sizing & Design Trainings
- Type: Live In-Person
- Location: 105 Mclaughlin Rd, Rochester, NY 14615
July 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
August 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
September 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
October 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
November 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
December 2024
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
January 2025
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
February 2025
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line
March 2025
Application of AWHPs for Hydronic Heating & Cooling
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program ASHP or GSHP contractor requirements.
Modern air-to-water heat pumps are an emerging renewable energy heat source. They can also provide cooling. When combined with a hydronic distribution system, these heat pumps provide unsurpassed year-round comfort. They can also serve ancillary loads such as domestic water heating and pool heating. The efficiency of modern “low ambient” air-to-water can approach that of geothermal heat pumps on a seasonal basis, and usually at an installed cost that’s less than half that associated with geothermal heat pumps. This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
- Topic: Other
- Location: On-line
- Trainer: HeatSprings
ASHP: Achieving Comfort and Efficiency in Cold Climates
Sponsored by Steven Winter Associates
On-Demand Training | Available at Any Time
This training is not a manufacturer sponsored training and does not meet the requirements for the NYS Clean Heat program contractor requirements.
Steven Winter Associates, Inc. (SWA) has developed an online training focused on the successful implementation of inverter-driven air-source heat pumps (ASHPs) in colder climates. The training takes a big-picture approach to helping stakeholders achieve both efficiency and comfort with ASHPs.
The course covers a multitude of real-world examples of both good and bad applications. ASHPs can work very well in many cold climate applications, but they are not plug and play solutions. The technology has limitations, and good performance requires thoughtful design and implementation. The intent of this course is to help people implement systems effectively and meet comfort and performance goals.
Note: You cannot enroll in any paid courses through the mobile app, this must be done through a web browser. Courses may be accessed for one year from the date of purchase.
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: SWA
ccASHP Sizing & Design Training by Lennox
Sponsored by Lennox
On-Demand Training | Available at Any Time
All new ASHP installers need to show proof of completing an ASHP manufacturer-sponsored cold-climate ASHP size-and-design training as part of their application to be a participating contractor.
The content includes air source heat pump application details for specifying cold climate heat pumps that will optimize energy and thermal comfort performance for residential homes.
Your online learning time is recorded, you must view the entirety of this course in order to receive the certificate. Once you have completed this course, we will automatically provide you with a certificate of Completion which can be submitted to Clean Heat Incentive program for proof of completion.
This course is also NATE Certified! If you have questions or issues with accessing this course through your LennoxPros.com account please call (800) 654-3283 (option 2).
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Lennox
Cold Climate Air Source Heat Pump Sizing & Design Training
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
Fujitsu Cold Climate Heat Pump (Part 1)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Fujitsu Cold Climate Heat Pump (Part 2)
Sponsored by Fujitsu
On-Demand Training | Available at Any Time
This training has been pre-recorded and can be taken at any time. It has two modules that must be completed. You must register for each module and complete both. Your on-line learning time is recorded, you must view the entirety of each module in order to receive the certificates. Once you complete a module, you will receive an email within 24 hours to complete a survey. We will email your certificate within one week of receiving the survey. You can submit both certificates to the NYS Clean Heat program for proof of completion.
After registering, you will receive a confirmation email containing information about joining the webinar.
- Topic: Sizing & Design Trainings
- Location: On-line
- Trainer: Fujitsu
Heat Pump System Design and Installation
Sponsored by HeatSpring
On-Demand Training | Available at Any Time
This a bundle of 9 courses taught by Sean Armstrong, Ryan Carda, John Siegenthaler, and Jon Harrod:
• Heat Pump System Fundamentals
• Air-to-Water Heat Pump Fundamentals
• Geothermal Heat Pump Fundamentals
• Air-to-Water Heat Pump Applications
• Geothermal Heat Pump Applications
• Hydronic Distribution Systems for Heat Pumps
• Small-Scale Chilled Water Cooling
• Forced Air Distribution for Heat Pump Systems
• Heat Pump Standards & Regulations in the USA and Canada
This is a series of professional development training courses for HVAC engineers, contractors, project managers, and building owners. Learn to design and install heat pump systems with confidence. Rigorous assessments have been developed to make sure you know the correct approach to designing and installing heat pump systems.
Ready To Sign Up Today?
- Topic: Installation & Service Trainings
- Location: On-line
- Trainer: HeatSpring
Mitsubishi Electric Trane HVAC US On-Demand Trainings
Sponsored by Mitsubishi Electric Trane HVAC US
On-Demand Training | Available at Any Time
- Topic: Sizing & Design Trainings
- Location: On-line
RLC Installation & Basic Service Online
Sponsored by Samsung
On-Demand Training | Available at Any Time
- Topic: Installation & Service Trainings
- Location: On-line